Use this when the first question is tank size, not total project cost.
You will get a likely minimum, a conservative recommendation range, and a rough maintenance cadence that stays honest when usage is uncertain.
Use this page when the first question is tank size, not total project cost. It turns bedrooms, occupancy, disposal use, and state-specific sizing signals into a likely minimum, a conservative range, and a rough pumping cadence.
You will get a likely minimum, a conservative recommendation range, and a rough maintenance cadence that stays honest when usage is uncertain.
Indiana Department of Health
IDOH's onsite sewage systems page says onsite systems are prohibited when sanitary sewer is available within a reasonable distance and connection is required. Indiana's 410 IAC 6-8.3 rule says the residential onsite sewage program is administered by local boards of health and uses 150 gallons per day per bedroom for residential design flow. IDOH also publishes county environmental territory contacts and a technical-review page warning that local ordinances may be stricter or interpreted differently than the state minimum, so the real homeowner permit path is county-first in practice.
No direct public Indiana homeowner garbage-disposal tank multiplier has been verified in the current source set.
Indiana looks statewide through IDOH, but the real homeowner workflow changes quickly once you know which county or local board holds the file and whether a stricter local ordinance applies.
Onsite systems prohibited where sanitary sewer is available within a reasonable distance
IDOH's onsite sewage systems page says onsite sewage systems are prohibited where sanitary sewer is available within a reasonable distance and connection is required.
Source: Onsite Sewage Systems Program | Onsite Sewage Systems Program
County environmental territory contacts published statewide
IDOH publishes county environmental territory contacts so homeowners can identify the local office handling onsite sewage questions.
Source: Environmental Territory Contacts by County | Environmental Territory Contacts by County
Residential onsite sewage program administered by local boards of health
Indiana's 410 IAC 6-8.3 says the residential onsite sewage systems program is administered by local boards of health.
Source: 410 IAC 6-8.3 Residential Onsite Sewage Systems | 410 IAC 6-8.3
150 gallons per day per bedroom gpd
Indiana's 410 IAC 6-8.3 uses 150 gallons per day per bedroom for residential sewage design flow.
Source: 410 IAC 6-8.3 Residential Onsite Sewage Systems | 410 IAC 6-8.3
Local ordinances may be more stringent or interpreted differently
IDOH's technical-review page says local health departments may have more stringent ordinances or may vary in interpretation from the state minimums.
Source: Technical Review Panel for Residential Onsite Sewage Systems | Technical Review Panel
The state guide explains the permit path, local verification links, records to request, and the reasons the final quote can move above the low end.
Most public rules start with bedrooms or bedroom-based design flow, which is why this tool treats them as the first sizing signal.
When household use is obviously heavier than bedroom count alone suggests, the conservative range moves up instead of pretending the lower end is still safe.
Garbage disposals and additional kitchens or ADUs raise the planning load and can justify a bigger homeowner-facing recommendation.
Even a strong tank-size estimate is not permit approval. Final sizing still depends on local review, site conditions, and the actual system path.
These state links are useful when you want a quick starting point before opening the full cost estimator or the state guide.
Use it as a planning tool to estimate a likely minimum tank size and a conservative range before you collect quotes or rely on old paperwork.
In many states, bedrooms or design flow are the main public sizing signal. Occupancy still helps widen the planning range when usage is clearly higher than the bedroom count suggests.
Sometimes yes. Some states call this out directly, and even where the rule is less explicit, disposal use is a reasonable homeowner-facing signal that the conservative range may need to move up.
Usually not. Seasonal use may soften the pumping cadence estimate, but it should not aggressively shrink a homeowner-facing size recommendation.
Use this estimator when you mainly want to know the likely tank band and whether disposal use, occupancy, or extra kitchens should widen it before you talk to installers.
Move to the full cost estimator when you need system-class risk, replacement planning, permit-path context, or a broader quote conversation.