Use this when the first question is tank size, not total project cost.
You will get a likely minimum, a conservative recommendation range, and a rough maintenance cadence that stays honest when usage is uncertain.
Use this page when the first question is tank size, not total project cost. It turns bedrooms, occupancy, disposal use, and state-specific sizing signals into a likely minimum, a conservative range, and a rough pumping cadence.
You will get a likely minimum, a conservative recommendation range, and a rough maintenance cadence that stays honest when usage is uncertain.
Ohio Department of Health
Ohio household sewage treatment systems serving one-, two-, or three-family dwellings are regulated under Chapter 3701-29 of the Ohio Administrative Code through the Ohio Department of Health. Ohio EPA's homeowner FAQ says local health departments are responsible for permitting, code enforcement, nuisance investigations, and operational inspections, and the Ohio rules include installation-permit and operation-permit requirements for HSTS and SFOSTS work.
No direct public Ohio homeowner garbage-disposal tank multiplier has been verified in the current source set.
Ohio looks statewide on paper, but the real homeowner path still runs through the local health district's permit file, inspection history, and enforcement context.
One-, two-, or three-family dwellings
Ohio EPA's homeowner FAQ says household sewage treatment systems serving one-, two-, or three-family dwellings are regulated under Chapter 3701-29 through the Ohio Department of Health.
Source: Information about Household Sewage Treatment Systems | Who regulates household sewage treatment systems?
Local health departments
Ohio EPA says local health departments are responsible for permitting, code enforcement, nuisance investigations, and operational inspections for household sewage systems.
Source: Information about Household Sewage Treatment Systems | Who regulates household sewage treatment systems?
Installation permit and operation permit
Chapter 3701-29 includes installation-permit and operation-permit requirements for HSTS and SFOSTS work, which is why Ohio homeowners need the local permit file early.
Source: Chapter 3701-29 | Household Sewage Treatment Systems | Rule 3701-29-09 permits
NPDES coverage may apply
Ohio EPA says household sewage treatment systems that discharge off lot may need NPDES general permit coverage, even though the local health department remains the first point of contact.
Source: Information about Household Sewage Treatment Systems | Ohio EPA off-lot discharge note
The state guide explains the permit path, local verification links, records to request, and the reasons the final quote can move above the low end.
Most public rules start with bedrooms or bedroom-based design flow, which is why this tool treats them as the first sizing signal.
When household use is obviously heavier than bedroom count alone suggests, the conservative range moves up instead of pretending the lower end is still safe.
Garbage disposals and additional kitchens or ADUs raise the planning load and can justify a bigger homeowner-facing recommendation.
Even a strong tank-size estimate is not permit approval. Final sizing still depends on local review, site conditions, and the actual system path.
These state links are useful when you want a quick starting point before opening the full cost estimator or the state guide.
Use it as a planning tool to estimate a likely minimum tank size and a conservative range before you collect quotes or rely on old paperwork.
In many states, bedrooms or design flow are the main public sizing signal. Occupancy still helps widen the planning range when usage is clearly higher than the bedroom count suggests.
Sometimes yes. Some states call this out directly, and even where the rule is less explicit, disposal use is a reasonable homeowner-facing signal that the conservative range may need to move up.
Usually not. Seasonal use may soften the pumping cadence estimate, but it should not aggressively shrink a homeowner-facing size recommendation.
Use this estimator when you mainly want to know the likely tank band and whether disposal use, occupancy, or extra kitchens should widen it before you talk to installers.
Move to the full cost estimator when you need system-class risk, replacement planning, permit-path context, or a broader quote conversation.